Operation
29 0000000141 - 002 - EN
6.4 Signs indicating the product is no longer safe to use
The following signs indicate that the gas booster is no longer safe to use. In such
cases, the gas booster must be put into a safe state immediately.
– Leaking high pressure seal
– Leaking booster head
– Leaking high pressure cylinder
– Leaking connections
– Leaking drive unit
– Visible damage
6.5 Putting the gas booster in a safe state
In a safe state, the gas booster is depressurised on the drive and high pressure
side. The steps necessary in order to achieve a safe state depend on the installa-
tion position in the system. Refer to the general system documentation for the
required actions.
To Next Page
Loading...