Maintenance
0000000141 - 002 - EN 34
7.2.5 Check fastening elements and connecting elements
The following section explains how to inspect the fastening elements and con-
necting elements:
Interval quarterly
Prerequisites – The gas booster is easy to access.
– The gas booster is depressurised.
Tools – Cotton cleaning cloth
– Solvent-free cleaning product
1.
WARNING
Risk of injury due to static electricity
Cleaning the gas booster may cause a charge to accumulate in non-conduc-
tive layers. Explosions with severe injuries or death can result.
► Only clean the gas booster while damp.
► Use cotton cleaning cloth.
Clean the gas booster.
2. The cleaning process has been successful if:
– the gas booster is free of dirt.
– ports and silencers are free of dirt.
Description
Description
Qualifications Repair and service gas booster
Type of mainte-
nance
Check
Interval quarterly
Prerequisites – The gas booster is easy to access.
– The gas booster is depressurised.
Tools Torque spanner
1. Check all fastening elements and retighten if necessary.
2. Check all connecting elements and retighten if necessary.
3. The inspection has been successful if:
– all fastening elements are properly tightened.
– all connecting elements are properly tightened.
To Next Page
Loading...
