MaxxOne Falcon - Page 14

USER MANUAL
9
4.2.1.1.2 Live
Go to “Main Menu” → “Display” → “Live” to enter into the interface shown as Picture4-5.
Picture4-5
Picture4-6
4.2.1.1.3 Output
Go to “Main Menu” → “Display” → “Output” to enter into the interface shown as
Picture4-7
Picture4-7
 Video Output
：
Live Output
 SEQ Mode
：
Set sequence mode
 SEQ Dwell Time
：
Sequence dwell time is
set 5 seconds by default. User may set it
as required.
 VGA/HDMI Resolution
：
VGA output or
HDMI output. Including 1024×768 ，
1280×1024 ， 1440×900 ， 1280×720 ，
1920×1080,1680×1050,1600×1200,1900
×1200
 2560×1440,3840×2160
 Transparency
：
Set the transparency of
the menu in the range of 0—128.

Channel：Select channel number.
 Show Time：Tick the checkbox to display time.
 Channel Name：Name marked on IPC
 Date Format：Set date format such as m/d/y or
y/m/d
 Time Format：12 hour or 24 hour
 OSD Position：Freely set the position of IPC
name and time
 Color：Adjust the chroma, brightness, contrast
and saturation of the IPC of the channel.
Refer to Picture 4-6