4.2.4 System
4.2.4.1 General
4.2.4.1.1 General
Go to “Main Menu” → “System” → “General” to enter into the interface shown as Picture
4-30.
Picture 4-30
4.2.4.1.2 DST
Go to “Main Menu” → “System” → “General” → “DST” to enter into the interface
Picture 4-31
4.2.4.1.3 NTP
Go to “Main Menu” → “System” → “General” → “NTP” to enter into the interface.
Picture 4-32
Enter into the interface shown as
Picture 4-31 to set DST, Time
Offset, Start Time and End Time.
NTP service: Enable/Disable NTP function.
Server Address: Select NTP server
(time.windows.com, time.nist.gov,
pool.ntp.org).
Time Zone: Corresponding time zones for
various nations or regions.
Update Time: Enable NTP function and
save parameters and click Update Time to
calibrate the system time.
Note: When NTP function is set to “Enable”,
system will calibrate the system time at
every 00:07:50 and every start-up.
User may set Date, Time, Date
Format, Time Format, Language,
Video Format, Menu Timeouts and
Show Wizard in this page.
To Next Page
Loading...