MaxxOne Falcon - 4.2.1 Parameter Settings

USER MANUAL
8
4.2 Main Menu
Picture 4-2
4.2.1 Parameter
4.2.1.1 Display
4.2.1.1.1 IP Camera
Go to “Main Menu” → “Display” → “IP Camera” to enter into the interface shown as
Picture4-3.
Picture4-3
Picture4-4
On LIVE mode, click the mouse button,
or [Menu] button on the remote controller, or
click [ ] icon on the toolbar to enter the
main menu screen, as shown in Picture 4-2.
If system interface is locked, refer to
section 4.3 to unlock by inputting password.
In Main Menu mode, you can make
settings for Parameter, Record Search,
Device, System, Advanced and Shutdown.
 Channel
：
IPC camera channel
 Edit
：
Modify the name and location of channels,
change other IPC or protocols, etc., as shown in
Picture 4-4.
 State
：
Display IPC on-line state
 IP address
：
Modify IP address of IPC camera.
 IP Address/Domain
： IP address of the IPC
connected of the channel
 Subnet Mask
：
IPC camera subnet mask
 Port：Connection port number of the currently set
IPC.
 Manufacturer：Manufacturer for different IPC
 Device type：Add IPC with different protocols.
 Protocol： The selected access protocol for IPC to
connect to NVR
 MAC Address：Physical address for device
 Software：Display current version of IPC.