MaxxOne Falcon - Chapter 2 NVR Connection; 2.1 HDD Installation; 2.2 Camera and Monitor Setup; 2.3 Power Supply Connection

USER MANUAL
4
Chapter 3 NVR Boot up
3.1 System Initialization
After connecting the power cable of NVR to wall outlet and pressing the power button, you
will enter into the NVR system initializing screen shown as Picture3-1.
Picture3-1
Note
：
The illustrations in this user
manual may not match the menu
interface in your monitor exactly. All
the illustrations are for users’
reference only. If you are having
difficulty, please contact our support
team.