132
Controls in detail
Seats
1 Fully reclined position
2 Upright position
3 Head restraint height
4 Head restraint tilt
5 Seat backrest tilt
6 Seat cushion depth
7 Seat cushion tilt
8 Seat fore and aft adjustment
9 Leg rest length
a Leg rest tilt
Fully reclined/upright position
To adjust seat to fully reclined posi-
tion, press switch 1.
Press and hold switch 1 until seat is
in desired position.
To stop the seat adjustment proce-
dure, release switch 1.
To adjust seat to upright position,
press switch 2.
Press and hold switch 2 until seat is
in desired position.
To stop the seat adjustment proce-
dure, release switch 2.
Head restraint height
Press switch up or down in direction
of arrow 3.
Head restraint tilt
Press switch forward or backward in
direction of arrow 4.
Seat backrest tilt
Press switch forward or backward in
direction of arrow 5 until your arms
are slightly angled when holding the
steering wheel.
i
The rear center seat* cannot be ad-
justed.
i
Adjust the head restraint in such a
way that it is as close to the head as
possible.
Warning! G
For your protection, drive only with prop-
erly positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the po-
tential for injury to the head and neck in
the event of an accident or similar situa-
tion.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
The functions for adjusting backrest
tilt and seat fore and aft are linked
functions. When the seat is adjusted
fore and aft, the backrest tilt is ad-
justed simultaneously, and vice versa.
To Next Page
Loading...
