133
Controls in detail
Seats
Seat cushion depth
Press switch forward or backward in
direction of arrow 6 until your legs
are supported comfortably.
Seat cushion tilt
Press switch up or down in direction
of arrow 7 until your upper legs are
lightly supported.
Seat fore and aft adjustment
Press switch forward or backward in
direction of arrow 8.
Leg rest length
Press switch up or down in direction
of arrow 9 to adjust the leg rest
length.
Leg rest tilt
Press switch up or down in direction
of arrow a to adjust the leg rest tilt.
Extending and retracting the rear seat
head restraints
Retracting rear seat head restraints
The switch is located on the lower part of
the front center console.
1 Switch for rear seat head restraints
Switch on ignition ( page 54).
Press switch 1.
The rear seat head restraints retract.
i
When moving the seat, be sure that
there are no items in the footwell or
behind the seats. Otherwise you
could damage the seats.
Warning! G
For your protection, drive only with prop-
erly positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the po-
tential for injury to the head and neck in
the event of an accident or similar situa-
tion.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
You can only retract the rear seat
head restraints when no rear seat
passenger is wearing a seat belt.
To Next Page
Loading...
