368
Operation
Tires and wheels
Press button k or j repeatedly
until you see the current inflation
pressures for each tire appear in the
multifunction display or the follow-
ing message appears in the multi-
function display
TIRE PRES. DISPLAY
APPEARS AFTER
DRIVING A FEW
MINUTES
Press reset button J ( page 25).
The following message will appear in
the multifunction display:
MONITOR CURRENT
TIRE PRESSURES?
Press button æ.
The following message will appear in
the multifunction display field:
TIRE PRES. MONITOR
REACTIVATED
The tire inflation pressure monitor
will now monitor the tire inflation
pressure values of all four tires.
Afterward, the following message
will appear in the display:
TIRE PRES. DISPLAY
APPEARS AFTER
DRIVING A FEW
MINUTES
This display appears until the individ-
ual inflation pressure values are
matched with the tires. The individu-
al values are then displayed.
If you wish to cancel activation:
Press button ç
NO
.
If one of the following messages ap-
pears in the display:
TIRE PRES. MONITOR
REACTIVATE AFTER
CORRECTING PRESSURE
TIRE PRESSURE
PLEASE CORRECT
Check the tire inflation pressures and
correct them if necessary.
Reactivate the tire inflation pressure
monitor.
i
If you are transporting a deflated tire
in the vehicle, do not activate the tire
inflation pressure monitor until:
the deflated tire is no longer in
the vehicle
you have inflated the tire to the
correct pressure
To Next Page
Loading...
