McIntosh MHT100 User Manual

25
SETUP
The following listings indicate the factory default settings.
Refer to the listed page number for instructions on how to
change a default setting.
Default Settings
Speaker Size:
Speaker Type Size or ON/OFF Refer to Page
Front ........................ Small ........................... 27
Center ...................... Small ........................... 27
Surround.................. Small ........................... 27
Back ........................ Yes .............................. 27
Subwoofer ............... Yes .............................. 27
Speaker Time Delay:
Speaker Location Delay Refer to Page
Center .................... 0mS............................ 28
Right Surround ...... 0mS............................ 28
Left Surround ........ 0mS............................ 28
Speaker Level:
Speaker Location Initial Level Refer to Page
Left Front ...................0dB ........................ 29
Center .........................0dB ........................ 29
Right Front .................0dB ........................ 29
Right Surround ...........0dB ........................ 29
Back Surround ...........0dB ........................ 29
Left Surround .............0dB ........................ 29
Subwoofer .................. 0dB ........................ 29
Subwoofer Settings:
Setting Initial Setting Refer to Page
MC Bass .....................OFF ....................... 31
Sub Crossover ............ 80Hz ...................... 31
DD LFE
1
Level ...........0dB ........................ 31
Analog Inputs (Zones A and B):
Number Name Refer to Page
1 ......................... AUX .......................... 33
2 ......................... CD ............................. 33
3 ......................... SAT ............................ 33
4 ......................... TV.............................. 33
5 ......................... DVD .......................... 33
6 ......................... VCR 1 ........................ 33
7 ......................... VCR 2 ........................ 33
8 ......................... TUNER...................... 33
Figure 13
DO YOU WANT TO SAVE THEM?
0 NO
1 YES
Figure 12
MAIN SYSTEM SETUP
1. SPEAKER SIZE
2. SPEAKER TIME DELAY
3. SPEAKER LEVEL
4. SUBWOOFER SETTINGS
5. SOURCE SETTINGS
6. VIDEO POWER CONTROL
7. TUNER PRESETS
8. SYSTEM SETTINGS
EXIT
1
DD (Dobly Digital) LFE (Low Frequency Effect) Sound
Information is usually assigned to the Subwoofer Channel. If
the Subwoofer Channel is switched off and the Front
Channel Loudspeakers are set to Large in the Speaker Size
Setup Menu, the LFE Sound Information will be redirected
to the Large Loudspeaker(s).
SETUP Menu by pressing the SELECT Push-button.
5. Exit the MAIN SYSTEM SETUP Menu by pressing
the Up or Down directional push-buttons followed
by the SELECT Push-button.
6. If adjustments have been performed, the Adjustment
Acceptance Menu will appear on the Monitor/ TV
screen asking if you want to save the adjustments in
memory. Use the Up or Down directional push-
buttons to select YES to save, or NO to not save, then
press the SELECT Push-button to exit the Setup Mode
and return to normal operation. Refer to figure 13.

McIntosh MHT100 Specifications

General

Brand	McIntosh
Model	MHT100
Category	Network Router
Language	English