47
Figure 61
How to Operate the MHT100, con’t
Figure 60
2. Select the desired Zone B Source and adjust the Vol-
ume to the desired listening level by pressing the ap-
propriate push-buttons on the Keypad or Remote Con-
trol. Refer to figures 60, 61 and 62.
Note: If Zone A is On, Zone B Input may be changed from
the MHT100 Front Panel by first pressing the ZONE
B Push-button and then rotating the INPUT Selector
Control until the desired source is selected.
3. If a McIntosh Disc Player is connected to the
MHT100, most operating functions can be performed
with the keypad or Remote Control.
Figure 62
To Next Page
Loading...
Need help?
General