“SE Series” Service and Parts ManualMarch 2017
Page 1-4
FREQUENT INSPECTION CHECKLIST
S
TEERING
Y
OKES
Regular application of lubrication to the steer yokes is essential to good machine
performance and service life. Continued use of an insufficiently greased steer yoke will
result in component damage.
1. Open the steer yoke cover.
2. Locate the grease fitting on the top of the steer yoke.
3. Pump multipurpose grease into the steer yoke until the steer yoke is full and grease is
being forced past the bearings.
4. Install the cover.
5. Repeat this step for the other steer yoke.
Grease Specification
Chevron Ultra-duty grease, EP NLGI 1 (lithium based) or equivalent
H
YDRAULIC
F
LUID
Inspect the condition of hydraulic fluid in the reservoir.
Oil should be a clear and amber in color.
B
ATTERIES
Proper battery condition is essential to good machine performance and operational
safety. Improper or damaged cables and connections can result in component damage
and hazardous conditions.
ELECTROCUTION / BURN HAZARD. CONTACT WITH ELECTRICALLY
CHARGED CIRCUITS COULD RESULT IN DEATH OR SERIOUS
INJURY.
REMOVE ALL RINGS, WATCHES, AND OTHER JEWELRY.
WEAR PROPER PERSONAL PROTECTIVE EQUIPMENT (PPE) - FACE
SHIELD & GLOVES BEFORE SERVICING THE BATTERIES.
BODILY INJURY HAZARD. BATTERIES CONTAIN ACID. AVOID SPILLING
OR CONTACTING BATTERY ACID. NEUTRALIZE BATTERY ACID SPILLS
WITH BAKING SODA AND WATER.
To Next Page
Loading...
