“SE Series” Service and Parts Manual March 2017
Page 2-11
PARAMETER ADJUSTMENT
P
ARAMETER
A
DJUSTMENT
PARAMETERS SHOULD BE ADJUSTED ONLY IF THE FUNCTION IS
OPERATING OUTSIDE OF MACHINE SPECIFICATIONS, OR IF WRITTEN
APPROVAL IS OBTAINED FROM MEC PRIOR TO MAKING THE CHANGE.
The following adjustments are made
at the Platform Controls station using
the LED Indicator to display the
current settings. Follow the
instructions to reach the desired
setting.
Change the setting by using the
Steer Buttons on top of the control
handle. The right button increases
the setting. The left button decreases
the setting.
Number represent a percentage. 99
means 99%. 9°9 (dot between the
digits) means 100%.
ART_5126
LED Indicator
To Next Page
Loading...
