SE Series Slab Scissors
Lubrication
Operator may perform routine maintenance only. Lubrication listed as Scheduled Maintenance must be performed by a qualified
service technician.
Lubrication
No. ITEM SPECIFICATION FREQUENCY
1Hydraulic
Reservoir
Mobile Fluid DTE 10, DTE 13 M, or AW32 Routine Maintenance
Check hydraulic oil level every week
Scheduled Maintenance
Change yearly or every 600 hours, whichever occurs
first
Do not substitute other fluids as pump
damage may result.
Check as shown above with platform in the
stowed position. Fill as needed.
2Hydraulic Cap
Breather Filter
And
Hydraulic Filter
Breather Filter
(located inside Filler Cap)
Hydraulic Filter Canister
Scheduled Maintenance
Normal Conditions
Change every six months or 300 hours, whichever
occurs first
Severe Conditions--very dusty, exceptionally hot or
exceptionally cold conditions
Change every three months or 150 hours, whichever
occurs first
ART_5181
2632SE
3346SE
4046SE
4555SE
1930SE
Hydraulic
Pump & Motor
Hydraulic
Reservoir
Hydraulic
Filter
Hydraulic
Pump & Motor
Hydraulic
Reservoir
Hydraulic
Filter
FULL -- 16L
Controls
Tray
Controls
Tray
ADD -- 13L
Breather Cap
FULL
ADD
ANNUAL INSPECTION CHECKLIST
“SE Series” Service and Parts Manual March 2017
Page 1-15
To Next Page
Loading...
