page 9
It is possible to activate a backlight on the AFG display.
Press and hold UNITS whilst powering up the AFG with the
key. The backlight is now operating.
Please note that battery consumption is doubled when using
the backlight. For this reason the backlight setting is not
remembered after power down.
To conserve battery power, it is possible to activate an Auto-
off function so that the gauge powers down after 2 minutes
since the last key press.
Press and hold ZERO whilst powering up the AFG with the
key. The symbol ‘Ao’ will appear in the display to
indicate Auto-off is active. This feature is remembered after
power down.
For tension applications it is often desirable to reverse the
display, so that the operator can read it more comfortably.
Press and hold the MAX key whilst powering up the AFG with
the key to invert the display. This feature is remembered
after power down.
The AFG may be returned to its original factory default
settings, indicated on pages 28 and 29 of the Advanced
Menu Options section of this manual.
Press and hold the RESET key whilst powering up the AFG
with the key
Optional Settings
Backlit
Display
Auto-off
Invert Display
Factory Default
b
b
b
b
To Next Page
Loading...