To Next PageTo Next Page
Need help?Do you have a question about the Mecmesin afg 1000n and is the answer not in the manual?
General| Brand | Mecmesin |
|---|---|
| Model | afg 1000n |
| Category | Measuring Instruments |
| Language | English |
Instructions on how to turn the gauge on and the self-test procedure.
Procedure to reset the display to zero, useful for taring.
Guide to accessing and operating the AFG's advanced menu system.
Setting up alarm functions: OFF or ON with SET options.
Defining upper and lower limits for tension or compression alarms.
Selecting alarm indication methods: Audible, LED, or Both.
Choosing to consider values OUTSIDE or INSIDE set limits.
Setting alarm modes to PASS, FAIL, or PULSE for alerts.
Using % DROP feature with ALARM for break point detection.
Selecting PLC function status: OFF, RESET, or CONTINUOUS.
Setting required load limits for PLC output signal triggering.
Defining the % drop of full-scale value for break point determination.
Configuring communication port for peripheral devices and units display.
Setting the Baud rate for serial communication (e.g., 9600, 57600).
