LOWER VOICE
[LOWER]
You can split the keyboard to right and left area in this function.
Press button to turn on the lower voice.LCD lights the lower voice flag and displays
"VOICE L" and the lower voice name.
Split Point
In the Split Voice mode, you can assign two different Voices to opposite sections of the key
board, and play one Voice with your left hand while your right hand plays another.
#F3 is the default split point. Every keys can be set as the split point, and stored in memory.
(See function SPLIT POINT SELECT).
9
3
4
5
Press button, use the wheel or number key to select the lower voice number. The
default lower voice number is No. 50: Strings2.
Press again to turn off the lower voice.
[+/YES]/[-/NO]
[LOWER VOICE] button
The Keyboard Function
Accomp on
The keyboard not only plays three voices at the same time, but also has other necessary
functions.
The left area below the split point is the chord area by pressing the "A.B.C" button.
The bass and the chord voice phonate when playing the chord.
SPLIT POINT(#F3)
SPLIT POINT(#F3)
VOICRE R1/R2
VOICRE R1/R2
VOICE L
ACCOMP
To Next Page
Loading...
Need help?
General
