Megmeet MV200 Series - Page 140

140
Fig.6-22 No central point mode
The values corresponding to the pulse input frequency are all positive.
1: Central point mode 1
Fig.6-23 Central point mode 1
The pulse input has a central point. The frequency at the central point is half of the maximum pulse input
frequency P09.11. When the input pulse frequency is lower than the central point frequency, the
corresponding values are positive.
2: Central point mode 2
The pulse input has a central point. The frequency at the central point is half of the maximum pulse input
frequency P09.11. When the input pulse frequency is higher than the central point frequency, the
corresponding values are positive.