Megmeet MV200 Series User Manual

181
0: 9.6 kbps 1: 19.2 kbps 2: 45.45 kbps
3: 93.75 kbps 4: 187.5 kbps 5: 500 kbps
6: 1.5 Mbps 7: 3 Mbps 8: 6 Mbps
9: 12 Mbps
Other options: Reserved
Option fault status display
0: Option is normal
1: Option wire-break or other faults
Profibus-DP bus master and slave communications disconnection detection time.
When this function code is 0, do not perform break detection.
Please refer to the Option Manual for details.
Please refer to the Option Manual for details.
6.16 Protection and fault parameters (Group P97)
UintTens
Thousands
Action upon contactor abnormality :
0 : Activate protection and coast to stop
1 : Alarm and keep running
Action upon communication fault :
0 : Activate protection and coast to stop
1 : Alarm and keep running
2 : Alarm and stop in the stop mode (only in
serial port control mode)
3 : Alarm and stop in the stop mode (in all
control modes)
Hundreds
Action upon EEPROM abnormality :
0 : Activate protection and coast to stop
1 : Alarm and keep running
Action upon 24V/±10V short circuit :
0 : Activate protection and coast to stop
1 : Alarm and keep running
Fig.6-66 Fault protection and alarm property setting 1
O
p
tion fault dis
p
la
y
0~1
(
0
)
P40.25
Communications disconnection detection time 0.0~10.0
(
0.0
)
P40.26
In
p
ut data ma
pp
in
g
0~9999
(
0
)
P40.40～P40.49
Out
p
ut data ma
pp
in
g
0~9999
(
0
)
P40.30～P40.39
Reserved 0
P40.27～P40.29
Fault protection and alarm property setting 2 0~2223H (0000)P97.01
Fault
p
rotection and alarm
p
ro
p
ert
y
settin
g
1 0~1113H
(
0000
)
P97.00

Megmeet MV200 Series Specifications

General

Brand	Megmeet
Model	MV200 Series
Category	DC Drives
Language	English