2
Foreword
Thank you for choosing the MV200 series high performance general drive of Shenzhen Megmeet Drive
Technology Co., Ltd.
MV200 adopt unique control method to achieve the high performance, high torque, wide range speed
regulation. It has perfect anti-tripping control design, strong usability, good site adaptability to ensure
continuous and reliable operation in poor grid, dust and other complex environment. For the general customer
demand, MV200 provide practical process close-loop control, multi-functional input/output terminals, pulse
frequency reference, simple PLC and main/auxiliary reference control, satisfy the industry and customized
requirements, which is of great value for reducing the system cost and improving the system reliability.
MV200 can meet the requirements of the users for low noise and low EMI by adopting the integrated EMC
design and optimized PWM control technology.
The relevant precautions during the installation, wiring, parameter setting, troubleshooting and daily
maintenance will be detailed in this manual. To ensure the correct installation and operation of the MV200
series drive as well as its high performance, please read carefully this user manual before installing the
equipment. This manual shall be kept properly and delivered to the actual users of the drive.
Precautions for unpacking inspection
Please check carefully when unpacking the product:
·Whether the product has the damage signs;
·Whether the rated value in the nameplate is consistent with your order requirement.
We have implemented strict inspection on the manufacturing, package and delivery of the product. If there is
any error, please contact us or your distributor immediately.
We are engaged in the continuous improvement of drive. The relevant manuals provided by us are subject to
change without prior notice.
Safety Precautions
Operation without following instructions can cause death or severe personal injury.
Operation without following instructions can cause medium or slight personal injury or
damage to the product and other equipment.
·
Please install the product on the incombustible materials (e.g., metal), otherwise, fire may be caused.
·
Do not place any combustible material near the product, otherwise, fire may be caused.
·
Do not install the product in the environment with explosive gas, otherwise, explosion may be caused.
To Next Page
Loading...
Need help?
General
