83
point 1 of
the curve 1
P10.20
Minimum
reference of
curve 1
Minimum
reference 1
0.0%~P10.18 0.1% 0.0% √ √ ○
P10.21
Actual
value
correspond
s to the
minimum
reference of
curve 1
Actual value
corresponds
to minimum
reference 1
The same as P10.15 0.1% 0.0% √ √ ○
P10.22
Types of
analog
output
Types of
analog
output
Unit place of LED: AO1 selection
0: 0~10V(0~20mA)
1: 2~10V(4~20mA)
The current and voltage depend on the
hardware
1 0 √ √ ○
P10.23
Analog
output
terminal
AO1
functions
AO1
functions
0: Output frequency (0~ maximum
frequency)
1: Set frequency (0~ maximum
frequency)
2: Set frequency (after
acceleration/deceleration) (0~
maximum frequency)
3: Reserved
4: Output current (0~2*Ie)
5: Output current (0~2*Iem)
6: Output torque (0~3 * Tem)
7: Output torque current (0~3*I
tem)
8: Output voltage (0~1.2*Ve)
9: Bus voltage (0~800V)
10: AI1 after adjustment
11: AI2 after adjustment
12: Reserved
13: Output power (0~2*Pe)
14: Percentage of host device
(0~4095)
15~23: Reserved
24: Motor rotating speed (bipolar,
output frequency during V/F – slip
compensation)
25: Reserved (output the motor
temperature measured with constant
current source)
26: Percentage of bus card (0~4095)
Only the following function No. will be
shown in shortcut menu: 0~9
1 00 √ √ ○
P10.24 AO1 gain AO1 gain
0.0％~200.0% 0.1％
100.0% × √ ○
To Next Page
Loading...