5 Process-relevant parameters (VRP)
27
Rinsing
Factory settings
"Rinsing" program
Rinsing
Partial cycle repetition 1
Holding time [sec.] 120
Temperature [°C] --
Metering temp. [°C] --
Metering conc. [ml/l] --
DI proportion [%] 0
Quantity of water [l] 7
When changing the VRP, make a copy and enter the values in the following table:
Changes
"Rinsing" program
Rinsing
Partial cycle repetition
Holding time [sec.]
Temperature [°C] --
Metering temp. [°C] --
Metering conc. [ml/l] --
DI proportion [%]
Quantity of water [l]
Incorrect changes of the parameters can result in personal injury and/or damage to the device as well as
damage to property. MELAG does not accept any liability for such damage.
Date: ___________________ Signature service technician: ________________________________
To Next Page
Loading...
