7 Frequently Asked Questions (FAQ)
33
What does the log name mean?
Complete encoding of both the serial number and the total batch number is performed in the 8 digit log
name. Manually re-named files are always easy to identify but not to be recommended. A log name is
never assigned twice. The log name achieves good log sortability.
Knowledge of the encoding within the name of the log file is not necessary, as a double-click on the file
reveals the content and thus serial number and total batch number immediately. This requires assignment
of a log file to a text editor.
Pos. 1 2 3 4 5 6 7 8 X X X
Ex. C R 0 Z H 1 K P . P R O
Mean-
ing
Serial number Batch End of the
log files
Expla-
nation
Year of
constr.
Type Manufacture number
A..2010
B..2011
C..2012
D..2013
E..2014
F..
10-DTA
10-DTB
10E-DTA
10E-DTB
The manufacture number and the total batch
number are converted according to the same
principle. A small Excel application makes the
conversion possible.
PRO...Progr. successful
GPD...Graphic log
STR...Malfunction
STB...Malfunction in
standby
LOG...System log
STA...Status log
LEG...Key
DEM...Demo log
DES...Demo malfunction
Data and time of the log files
The date and time of the log files in Windows explorer are identical with the time of the program start, pro-
vided of course that the files were saved on the corresponding medium via immediate output. The informa-
tion is lost upon subsequent collected issue on a medium or e-mail dispatch.
Following change of the control electronics
If the control electronics must be replaced, the total batch count must be re-entered. This is possible in
menu Service > Batch counter (only for authorized specialists).
To Next Page
Loading...
