7 Frequently Asked Questions (FAQ)
36
How to set up the FTP server?
The following describes how to log on a device as user using the example of the MELAG FTP server:
1. Install the MELAG FTP server on your computer. If you have MELAview/MELAtrace, start the
installation directly from the installation assistant of MELAview/MELAtrace and follow the instructions
for installation.
PLEASE NOTE
To be able to install the FTP server by MELAG, you need to install the free-of-charge
media library "Microsoft .NET Framework 2.0" or a higher version on your computer.
With Windows Vista this media library is already included in the operating system.
2. Start the program. Depending on the configuration of the computer, it may be necessary to set the
FTP is an exception for the firewall of the computer.
3. Enter MELAtherm 10 as new user in the User tab.
User name = serial number of the device, e.g. 201910E-DTA1111; user password=MELAG12345.
Enter the four digits of the year of construction as the user name. The name plate only specifies the
two end digits of the year of construction.
Example: If the name plate contains "1910E-DTA1111", enter exactly "201910E-DTA1111" as the
user name.
4. Click on the folder and select the desired directory as storage location.
5. In the Log output menu, output a system or status log for testing.
6. Start the additional program "Rinsing" and check the immediate output of the log.
PLEASE NOTE
Moving the FTP server to another folder on the computer results in the loss of the user
settings.
n Never move the program files of the FTP server program.
Messages which could be displayed in the window of the FTP
server
Meaning
The following line is displayed for a longer time period:
14:12:14 Server has been started at Port 21
▪ The cable connection is
defective.
▪ The computer IP address is not
set correctly in the device (see
Setting the IP address
[}page29]).
The following lines are repeatedly displayed for a longer time
period:
< 14:12:22 192.168.41.10 USER: 201910E-DTA1111
> 14:12:22 192.168.41.10 USER: 201910E-DTA1111
<< Login or password incorrect >>
▪ The password MELAG12345 was
not entered correctly.
The following lines are displayed approx. every eight seconds:
< 14:03:22 192.168.41.10 USER: 201910E-DTA1111
> 14:03:22 192.168.41.10 USER: 201910E-DTA1111
<< is logged in.>>
> 14:03:52 192.168.41.10 USER: 201910E-DTA1111
<< C:\Dokumente und Einstellungen\Admin\Eigene
Dateien\Protokolle >>
< 14:12:22 192.168.41.10
QUIT
▪ The device and the FTP server
are successfully connected. But
no logs are transferred.
To Next Page
Loading...
