QDR InfiniBand Switch Platform User Manual Rev 3.4
Mellanox Technologies
25
The managed switch platform requires initial configuration to operate as an InfiniBand switch.
All internally managed switches come with an internal PPC based management board. This
board allows for internally managing the switch through a host PC or remotely through the Ether
-
net.
3.6.1 Installation Safety Warnings
For Safety Warnings in French see Section F,“Avertissements de sécurité d’installation
(French),” on page 76, for German see Section G,“Installation - Sicherheitshinweise (German),”
on page 78, and for Spanish see Section H,“Advertencias de seguridad para la instalación (Span-
ish),” on page 80.
For special regulations regarding Finland, Sweden, Denmark, and Norway see Section I,“Special
Regulations Regarding Finland, Sweden, Denmark, and Norway,” on page 83.
1. Installation Instructions
2. Over-temperature
3. Stacking the Chassis
4. Redundant Power Supply Connection - Electrical Hazard
5. During Lightning - Electrical Hazard
Read all installation instructions before connecting the equipment to the power source.
This equipment should not be operated in an area with an ambient temperature exceed-
ing the maximum recommended: 45°C (113°F). Moreover, to guarantee proper air
flow, allow at least 8cm (3 inches) of clearance around the ventilation openings.
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
This product includes a blank cover over the space for the redundant power supply. Do
not operate the product if the blank cover is not securely fastened or if it is removed.
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
To Next Page
Loading...
Need help?
General
