QDR InfiniBand Switch Platform User Manual Rev 3.4
Mellanox Technologies
9
April 2010 Rev 1.8 Added appendix with instructions for bringing the power cord from one side of
the switch to the other in a full rack.
Added Safety Warnings in Spanish
April 2010 Rev 1.7 Removed DDR switches.
January 2010 Rev 1.6 Added instructions in the installation section regarding putting the power cord
through the bracket Figure 15 and note on page 26.
Removed DDR switches.
January 2010 Rev 1.5 Updates figures to include the power side I2C connector.
Added Section 3.3.2.5 I2C Interface on the power side of the switch
December 2009 Rev 1.4 Added Chapter 6 regarding FabricIT-EFM licensing information.
Added Chapter 2Management modules and CPU connections
Section 4.3 on unmanaged switches including
The I2C connector should only be used when the FW cannot be updated in-
band.
October 2009 Rev 1.3 Fixed Depth of Standard switch in the Spec sheets
Added RJ45 console pinout to appendix.
Fixed Status Fan LED info on page 13. Added to Troubleshooting section.
Updated power numbers
Added IS5025Q-2SRC, IS5025Q-2BRC model numbers
September 2009 Rev 1.2 Added Spec sheets for IS5025 and IS5035
updated revision table
September 2009 Rev 1.1 Updated power numbers
September 2009 Rev 1.0 Initial Release
Table 1 - Revision History Table
Date Revision Description
To Next Page
Loading...
Need help?
General
