EasyManua.ls Logo

Menzi Muck A91 - 1.2 Information on the Operators Manual; 1.3 Limitation of Liability; 1.4 Copyright Information

Default Icon
228 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation Manual Menzi Muck A91 Page 11
General
1.2 Information on the operator's manual
This operator's manual describes the safe and correct handling of the machine. Observe the stipulated
safety instructions as well as the valid local accident-prevention regulations and general safety regula-
tions that apply at the location the equipment is used.
Before carrying out any work on or at the machine, read the operator's manual, especially the Safety
chapter and the respective safety instructions. You must have fully read and understood everything
you read there. These are basic instructions and suggestions pertaining to accident prevention. Faults
during operation, inspection and maintenance may result in injuries or death.
1.3 Limitation of liability
All details and instructions listed in this operator's manual have been written up taking the valid standards and re-
gulations into consideration, as well as the state-of-the-art and our many years of knowledge and experience.
We have tried to provide as exhaustive information as possible on accident-prevention during operation but we
cannot be held responsible for any missing information regarding dangers and danger sources.
The manufacturer does not accept any liability for damages due to:
Nonobservance of the manual
Non-intended of the machine
Improper assembly, commissioning, operation or maintenance of the machine
Use of the machine when safety equipment is defective or improperly installed or if safety or
protective devices are not in proper functioning condition
Non-compliance with the operating instructions regarding transportation, storage, assembly,
installation, commissioning, use, maintenance and equipping of the machine
Unauthorised modications to the construction of the machine
Unauthorised modications to the machine (for example hydraulic pressure and volume ow)
Insufcient monitoring of machine parts that are subject to wear and tear
Improperly performed repairs
Catastrophic damage caused by the inuence of foreign objects or force majeure
1.4 Copyright
Treat this operator's manual condentially. It is solely intended for persons working on and at the machine. It is for-
bidden to pass this operator's manual on to third parties without the written approval of the manufacturer.
Note !
Data protection
The content, texts, drawings, pictures and other representations
made in this manual are copyright protected. It is forbidden to
convey this information to third parties without the written appro-
val of the manufacturer.

Related product manuals