Page 152 www.menzimuck.com
Maintenance and Care
8.4 Lubricant table
Application Type Viscosity Quality Temperatures
Capacities
l/US-gall.
Diesel engine with
particulate filter
Diesel engine oil SAE 10W/40 Panolin Diesel Synth
EU-4 10W/40
> 25°C - 40°C 15 / 3.96
Diesel engine Diesel engine oil SAE 15W40
SAE 10W40
ACEA E4 - E7
API CI-4/CI4-PLUS
API CC/CD/CE
>20°C - 50°C
> 25°C - 40°C
15 / 3.96
Hydraulic system Hydraulic oil ISO VG 46 factory-filled with
Panolin HLP46 oder
Synth46 (Bio)
200 / 52.8
Diesel tank Diesel CFPP Klasse B
CFPP Klasse D
CFPP Klasse E
CFPP Klasse F
DIN-EN 590
max. 5% Biodiesel
> 0°C
> -10°C
> -15°C
> -20°C
Upper structure:
130 / 34.3
Chassis:
200 / 52.8
Cooler Coolant ASTM D6210 > -37°C 24 / 6.34
Transmission oil SAE 75W90 API-GL-4/5 0.9-2.5 liters
Swing gear Transmission oil SAE 75W90 API-GL-4/5 2.5 liters
Distributor gear Transmission oil SAE 75W90 API-GL-4/5 2.8 liters
Lubricants Lithium-based grease NLHI 2 EP-2 aply as necessary
Note !
Operating manual by the manufacurer of engine
For more details, refer to the operating manual provided by the
manufacturer of the engine.
Note !
Diesel
Cetane number 45 or higher. A cetane number of over 50 is pre-
ferred, especially at temperatures of below -20°C or elevations
of over 1500 m above see level. Filtering capability limit (CFPP)
below the anticipated minimum temperature OR turbidity point at
least 5°C below the anticipated minimum temperature. The ma-
ximum permissible biodiesel concentration is a 5% mixture (also
known as B5) with crude oil diesel fuel.
Attention !
Incorrect Diesel fuel
• Can result in damage to property.
• Raw-pressed vegetable oils, regardless of the concentration,
may never be used in the fuel in John Deere engines.
To Next Page
Loading...
