Menzi Muck A91 - Page 151

Operation Manual Menzi Muck A91 Page 151
Maintenance and Care
Menzi Muck
A91F
Intervalls Spezications Technical data
every 8 h / daily every 50 h / weekly 1st ervice 50-100 h every 500 h every 1000 h / jearly every 2000 h as required Specications Capacities in l Setting standards in mm Pressure in bar see page
Elektrical system
Battery Maintenance free 174
Battery and earth cable
174
Light and signalling system
Control and warning equipment
Electrical turning distributor 177
General setup
Air filter in suction channel 199370 154
Air conditioner coolant
R134a 154
Windscreen fluid
2 210
Chassis lubrication points
EP-2 NLGI Nr.2 205
Upper structure lubrication points
EP-2 NLGI Nr.2 203
Rotating assembly internal gearing
EP-2 NLGI Nr.2 204
Hub wheel air pressure
5 25
Steering wheel air pressure
8-9 25
Steering wheel bearing
205
Telescopic arm
209
Screw connections
Weld connections
Steel structure
All functions
l
= change = clean = grease = control = regulate
Note !
Hydraulic oil change interval
Take a sample of the oil after 2000 h and have it analysed. If the
result is OK then the hydraulic oil can be used for another 500
hours. Carry out another analysis after another 500 hours.