Operation Manual Menzi Muck A91 Page 17
Safety
2.2.2 Meaning of the warning symbols
1
• Warning
• Read the operator's
manual before commis-
sioning and starting the
machine.
7
• Warns of the danger of
the cab tipping over du-
ring operation.
• Only start the motor
once the cab is correct-
ly seated in its retainer
and is locked in place.
2
• Warning
• Before maintenance or
repairs, read the main-
tenance or repair in-
structions and remove
the ignition key.
8
• Warns of the risk of
being struck by the til-
ted cab.
• Position the cab tilt pro-
tection mechanism.
3
• Warns of the danger
from rotating parts such
as fans, etc.
• Switch off the machine
before inspections,
maintenance and re-
pairs.
9
• Warns of the risk of bur-
ning caused by hot wa-
ter or oil that sprays out
when opening the fan
or hydraulic tank cover
when still hot.
• Allow the fan or the
hydraulic tank to cool
down before removing
the cover.
4
• Warns of the danger
from moving parts.
• Only touch machine
parts after they have
completely stopped.
10
• Warns of the risk of ex-
plosion.
• Do not keep any aero-
sol cans in the toolbox.
5
• Warns of the danger
of being caught by the
attachment tool or the
machine.
• Keep outside of the
work area when opera-
ting the machine.
11
• Indicates the danger of
electric shock when the
machine is operated
near to power lines.
• Observe sufcient safe-
ty clearance!
6
• Warns of the risk of
being struck by the ma-
chine.
• Keep outside of the
work area when opera-
ting the machine.