Menzi Muck A91 - Page 80

Page 80 www.menzimuck.com
Control and Display elements
6.6.3 Seat belt
1. Make sure that seat belt is not twisted and
insert the buckle until it clicks into the buckle.
2. Adjuststraplength,sothatitrmlyapplies.
Pulllightlyonthebelttoensurethatit'stight.
3. For loosen the belt press the enter button on
the buckle.
6.6.4 Joystick
Thejoystickscanberotatedsothattheytperfectlyinoperators
hands:
1. Push back the sleeve.
2. Loosenthetopclampscrew.
3. Rotatethejoystickindesiredposition.
4. Tightentheclampscrew.
5. Pull down the sleeves.
Warning !
Not wearing the seat belt
• Canresultindeathorsevereinjuries.
• Fastenyourseatbeltsalwaysrmlywhenoperatingthema-
chine.
Warning !
Defective parts on seat belt
• Canresultindeathorsevereinjuries.
• Checkseatbeltanditsattachmentpartsbeforeeachusefor
wearanddefectiveparts.Replacedefectivepartswithnew
ones.
1
5
2
4