Page 90 www.menzimuck.com
Control and Display elements
Kabine kippen:
1. Place the machine on an even surface. Stretch the dipper
and lower the boom.
2. Pull forward the cab release lever.
3. Pull forward the top lever to unlock the cab.
4. Open the rear cover as described in the "Covers" chapter.
2
3
5. Plug the cab tilting lever into the hydraulic hand pump.
6. Switch the valve actuating lever to the right.
7. Pump until the cab is fully tilted.
8
8. Position the cab fastening mechanism.
5
6
7
7
To Next Page
Loading...
