Mercury 200 VERADO User Manual

MAINTENANCE
113
4. Unscrew the filter in a counterclockwise direction to remove.
ob01253
Filter Draining
1. Slide filter holder up to release from bracket. Hoses and wire
harness can remain attached to filter holder.
2. Tip the filter holder to drain any fluid into an approved
container.
ob01263
Filter Installation
1. Position filter holder onto bracket and secure filter holder in
place.
2. Lubricate the sealing ring on the filter with oil.
3. Install the filter and tighten securely by hand.

Mercury 200 VERADO Specifications

General

Engine Type	4-Stroke
Gear Ratio	1.85:1
Full Throttle RPM Range	5800-6400 RPM
Fuel System	Electronic Fuel Injection (EFI)
Exhaust	Through Prop
Horsepower	200 HP
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20", 25"
Starting	Electric
Fuel Type	87 Octane
Cylinder Configuration	Inline-6
Cooling System	Water-cooled with thermostat