Mercury 200 VERADO User Manual

MAINTENANCE
112
2. Remove fuel vapor purge relief valve cap (green cap located
aft of starter motor).
3470
!
CAUTION
Fuel vapor vent system is under pressure. Cover valve
assembly with a rag or towel to prevent fuel or fuel vapor spray.
Relieve pressure slowly.
3. Place rag or towel around valve, release pressure by pushing
core of valve end in.
3472

Mercury 200 VERADO Specifications

General

Engine Type	4-Stroke
Gear Ratio	1.85:1
Full Throttle RPM Range	5800-6400 RPM
Fuel System	Electronic Fuel Injection (EFI)
Exhaust	Through Prop
Horsepower	200 HP
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20", 25"
Starting	Electric
Fuel Type	87 Octane
Cylinder Configuration	Inline-6
Cooling System	Water-cooled with thermostat