PROPULSION MENU
98 eng
MODE
35710
SmartTow
[DOWN]
ON
[MODE]
[ UP ]
+ / - TO ENGAGE
SET
RPM
ACT
RPM
2580
2600
OFF
PROFILE : Launch ECO
RPM
Launch level ECO
4. To change the launch level, press the "MODE" button and
press the "+" or "–" button to change the launch setting.
5. To change the mode of cruise control, press and hold the
"MODE" button until the screen changes the mode of cruise
control.
CREATING A CUSTOMIZED LAUNCH SETTING
NOTE: Cruise and launch control is only available with Gen I
(2007) and newer DTS engines.
NOTE: The cruise control minimum and maximum range will
vary depending on the type of power package application.
Beyond launch level ECO are eight customized launch settings.
Each customized launch setting name can have up to seven
characters to identify the custom launch. The custom launch
setting can be controlled by RPM or speed. To use the speed
setting control, a paddle wheel must be installed, or a SmartCraft
GPS puck must be installed.
1. While in the "Main Menu," press the "–" or "+" to highlight
the "Propulsion" menu. Press the "MODE" button to enter
the "Propulsion" menu.
2. Press the "–" or "+" to highlight the "Smart Tow" screen.
To Next Page
Loading...
Need help?
General
