MCM MODELS - BRAVO AND BLACKHAWK DRIVES WITH DRIVESHAFT EXTENSION SERVICE MANUAL NUMBER 23
Page 2B-2 90-861326--1 MARCH 1999
Torque Specifications
Fastener Location lb-in. lb-ft Nm
Bearing Support (Tailstock) To Inner Transom Plate 35-40 47-54
Drive Shaft
Rear Engine Mount Bracket
Drive Shaft Shield
Extension Housing To Flywheel Housing 30 41
Flywheel Housing
Power Steering Hose Fittings 23 31
Remote Control Throttle Cable Cable Barrel Securely
Cable End Guide See Note
Front and Rear Engine Mounts
Hose Clamps Securely
Battery Cables
NOTE: Tighten, then loosen nut one-half turn.
Tools
DESCRIPTION PART NUMBER
Quicksilver Engine Alignment Tool 91-805475A1
Universal Protractor Obtain Locally
Lubricants / Sealants / Adhesives
DESCRIPTION PART NUMBER
Quicksilver Liquid Neoprene 92-25711--3
Quicksilver 2-4-C Marine Lubricant With
Teflon
92-825407A3
Loctite Pipe Sealant With Teflon Obtain Locally
Quicksilver U-Joint and Gimbal Bearing
Grease
92-828052A2
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General