Important Information
Page 1A-6 90-863758060 AUGUST 2006
IMPORTANT: 5.0L, and 5.7L models are not CE certified at the time of this publication.
Contact the appropriate Mercury MerCruiser Product Application Engineers (PAE), or
Mercury MerCruiser Technical Service for information on CE certified product.
OMXXXXXX
Dec 2004
X.XL
SERIAL#
D.O.M.
DISP.
FAMILY
FEL.
XXXXX XXXXXX
XX.X g/kW-hr
EMISSION CONTROL
INFORMATION
THIS ENGINE CONFORMS TO 2003 CALIFORNIA EMISSION
REGULATIONS FOR SPARK IGNITION MARINE ENGINES
REFER TO OWNER'S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS
0575
10652
Emission control label — CE marked
"SERIAL#" ‑ Engine serial number
"FAMILY" ‑ Engine family
"FEL." ‑ Family emission limit
"D.O.M." ‑ Date of manufacture
"DISP" ‑ Piston displacement
CE ‑ When this mark is present in the lower right corner of the Emission Control Information
Label, on the engine, the Declaration of Conformance applies.
NOTE: The following applies to CE marked products only.
DECLARATION OF CONFORMANCE – MERCURY MERCRUISER
This sterndrive or inboard engine when installed in accordance to Mercury MerCruisers’
instructions complies with the requirements of the following directives by meeting the
associated standards, as amended:
Recreational Craft Directive 94/25/EC; 2003/44/EC
Applicable Requirement Standards Applied
Owner’s manual (A.2.5) ISO 10240
Openings in Hull, Deck and superstructure (A.3.4) ISO 9093‑1; ISO 9093‑2
Handling characteristics (A.4) ISO 8665
Inboard Engine (A.5.1.1) ISO 15584; ISO 10088; ISO 7840; ISO 10133
Fuel System (A.5.2) ISO 10088; ISO 7840; ISO 8469
Electrical System (A.5.3) ISO 10133; ISO 8846
Steering system (A.5.4)
Applicable portions of: ISO 10592, ISO 8848 and
ABYC P‑17
Exhaust emission requirements (B.2) ISO 8178
Owner’s manual (B.4) ISO 8665
Noise emission levels (C.1) ISO 14509
Ignition‑protected equipment (Annex II) ISO 8846; SAE J1171; SAE J1191; SAE J 2031
To Next Page
Loading...
Need help?
General
