Mercury MERCRUISER Product Applications Manual

Predelivery Preparation
90-863758060 AUGUST 2006 Page 10A-1
10
A
Predelivery Preparation
Section 10A - Predelivery Preparation
Table of Contents
Predelivery Inspection....................................10A-2
Operating Engine With the Boat out of the Water
.......................................................................10A-2
Propeller Selection.........................................10A-3
Selection Procedure...............................10A-3
Cruising RPM..........................................10A-5
How Elevation and Climate Affect Performance
.......................................................................10A-5
Power Package Preparation for Shipment.....10A-6
Extended Storage...................................10A-6
Draining the Cooling System..................10A-7
Engine Corrosion Protection...................10A-7
Disconnecting the Battery.......................10A-7
Disconnecting the Propeller Shaft Coupling
................................................................10A-8
Predelivery Inspection Checklist.............10A-9

Mercury MERCRUISER Specifications

General

Number of Cylinders	4, 6, 8
Engine Type	Inboard/Outboard (Sterndrive)
Fuel Type	Gasoline
Aspiration	Naturally Aspirated
Cooling System	Water Cooled
Weight	Varies by model
Cylinder Configuration	Inline
Displacement Range	3.0L-8.2L