Important Information
90-863758060 AUGUST 2006 Page 1A-13
Torque Specifications
NOTE: Securely tighten all fasteners not listed below.
Description Nm lb. in. lb. ft.
Engine mount bracket screws 64 47
Trunnion clamping screws and nuts 68 50
Thermostat housing attaching screws 41 30
Propeller shaft coupling screws and nuts 68 50
Shift and throttle cable fasteners
Tighten securely, then loosen ½ turn to
allow pivot points to rotate
Fuel inlet fitting (water separator)
Apply #567 loctite pipe sealant with
teflon to threads.
Do not use teflon tape.
1¾ to 2¼ turns past finger tight.
To Next Page
Loading...
