Mercusys MR47BE - Page 107

97
Chapter 4 Congure the Router in Wireless Router Mode
• CWMP - Toggle on to enable the CWMP function.
• Inform - Enable to send an inform message to the ACS periodically.
• Inform Interval - Enter the time interval when the Inform message will be sent to the ACS.
The default value is 3600 seconds.
• Data Model - Select under your ISP’s instructions the data model according to which the
inform message will be sent to the ACS.
• WAN IP Address - Displays the WAN IP Address of the router.
• ACS URL - Enter the web address of the ACS provided by your ISP.
• ACS Username/Password - Enter the username/password to log in to the ACS server.
• Interface used by TR-069 client - Select the interface to be used by the TR-069 client.
• Connection Require Authentication - Check this box to enable authentication for the
connection requests.
• Username/Password - Enter the username/password for the ACS server to log in to the
router.
• Path - Enter the path for the ACS server to log in to the router.
• Port - Enter the port that connects to the ACS server.
• URL - Enter the URL that connects to the ACS server.
• Stun - Enable or disable the STUN (Simple Traversal of UDP through NAT) function.
• STUN Maximum / Minimum Keep Alive Period - Enter the minimum/maximum time to
maintain NAT binding.
• STUN Server Address - Enter the STUN server address provided by your ISP.
• STUN Server Port - Enter the STUN server port number provided by your ISP.
• STUN Server Username/Password - Enter the username/password to log in to the STUN
server.