77
Chapter 4 Congure the Router in Wireless Router Mode
5. Configure LAN ports. Windows users are recommended to choose from DHCPv6 and
SLAAC+Stateless DHCP.
6. Locate the MAC Clone section. You can choose an option as needed (enter the MAC
address if Use Custom MAC Address is selected), and click SAVE.
4. 11. 2. Set up IPv6 Firewall Rules
IPv6 Firewall protects your IPv6 network by preventing access from the internet. However,
when you are hosting a service, such as a file sharing server in your local network, you can
choose to allow access to the server from the internet by adding entries on this page. This
feature is available only when you’ve set up an IPv6 connection.
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set for the
router.
2. Go to Advanced > IPv6, and locate the Firewall Rules section.
3. Click Add.
4. Select a service from the drop-down list of Service Type. The Port and Protocol will be
automatically filled in. It is recommended to keep the default Port and Protocol if you are
unsure about which to use. If the service is not listed, please manually enter the Service
Type, and specify the Port and Protocol.
To Next Page
Loading...
