33
Chapter 4 Congure the Router in Wireless Router Mode
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set for the
router.
2. Go to Advanced > Wireless > Guest Network. Locate the Guest Permissions section.
3. Customize guest network options according to your needs.
• Allow guests to see each other
Tick this checkbox if you want to allow the wireless clients on your guest network to
communicate with each other via methods such as network neighbors and Ping.
• Allow guests to access my local network
Tick this checkbox if you want to allow the wireless clients on your guest network to
communicate with the devices connected to your router’s LAN ports or main network
via methods such as network neighbors and Ping.
4. Click SAVE. Now you can ensure network security and privacy!
4. 5. 4. IoT Network
This feature further secures your home network by allowing you to create a dedicated
wireless network to manage your loT devices together, such as smart lights and cameras.
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set for the
router.
2. Go to Advanced > Wireless > IoT Network.
3. Create an IoT network as needed.
1 ) Tick the Enable checkbox for the 2.4GHz, or 5 GHz wireless network. For the 5 GHz
network, make sure your IoT devices can connect to a 5 GHz network.
2 ) Customize the SSID. Don‘t select Hide SSID unless you want your IoT devices to
manually input the SSID for network access.
3 ) Select the Security type and customize your own password. If None is selected, no
password is needed to access the IoT network.
To Next Page
Loading...
