80
Chapter 4 Congure the Router in Wireless Router Mode
4. 12. 2. Add a Range Extender as a Satellite Device
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set for the
router.
2. Go to Advanced > EasyMesh, and enable EasyMesh.
3. Plug in the extender next to the main router.
4. With in 2 minutes, press the WPS button on main router and on the extender. Wait until the
WPS process is complete.
5. Done! You can check the mesh device on the router’s web page too.
To Next Page
Loading...
