30
Chapter 4 Congure the Router in Wireless Router Mode
• TWT - Target Wake Time allows 802.11ax routers and clients to negotiate their periods
to transmit and receive data packets. Clients only wake up at TWT sessions and remain in
sleep mode for the rest of the time, which significantly extend their battery life.
• OFDMA - This feature enables multiple users to transmit data simultaneously, and thus
greatly improves speed and efficiency. Noted that only when your clients also support
OFDMA, can you fully enjoy the benefits.
• MU-MIMO - A router with the MU-MIMO feature serves multiple devices simultaneously
while a traditional router serves only one user at a time. That means MU-MIMO can provide
a faster, more efficient Wi-Fi network for multi-users.
Note: Devices supporting 5GHz wireless band can enjoy the MU-MIMO service.
• Smart Connect - This feature allows the router’s 2.4GHz and 5GHz bands to use the same
wireless settings. The router can balance network demand and assign devices to the
optimum band.
• 2.4GHz/5GHz/6GHz - Select this checkbox to enable the 2.4GHz/5GHz/6GHz wireless
network.
• Network Name (SSID) - Enter a value of up to 32 characters. The same Name (SSID) must
be assigned to all wireless devices in your network.
• Hide SSID - Select this checkbox if you want to hide the network name (SSID) from the Wi-
Fi network list. In this case, you need to manually join the network.
• Security - Select an option from the Security drop-down list. We recommend you don’t
change the default settings unless necessary.
• Transmit Power - Select High, Middle or Low to specify the data transmit power. The
default and recommended setting is High.
• Channel Width - Select a channel width (bandwidth) for the wireless network.
To Next Page
Loading...
