61
Chapter 4 Congure the Router in Wireless Router Mode
7. Click Add.
1 ) Enter the Username and Password to authenticate devices to the L2TP/IPSec VPN
Server.
2 ) Click ADD.
Step 2. Configure L2TP/IPSec VPN Connection on Your Remote Device
The remote device can use the Windows or Mac OS built-in L2TP/IPSec software or a third-
party L2TP/IPSec software to connect to L2TP/IPSec Server. Here we use the Windows
built-in L2TP/IPSec software as an example.
1. Go to Start > Control Panel > Network and Internet > Network and Sharing Center.
2. Select Set up a new connection or network.
To Next Page
Loading...
