Mercusys MR60X - Page 57

49
Chapter 4 Congure the Router in Wireless Router Mode
• Dynamic IP(SLAAC/DHCPv6): Click Advanced Settings to input further information if your
ISP requires. Save the settings and click RENEW.
• PPPoE: By default, the router uses the IPv4 account to connect to the IPv6 server. Click
Advanced Settings to input further information if your ISP requires. Save the settings and
click CONNECT.
Note: If your ISP provides two separate accounts for the IPv4 and IPv6 connections, manually enter the username and
password for the IPv6 connection.
• 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type.
Please manually set up your internet connection first. Click Advanced Settings to input
further information if your ISP requires. Save the settings and click CONNECT.