72
Chapter 5
Congure the Router in Access Point Mode
5. 5. Administration
5. 5. 1. Change Password
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to System > Administration, and focus on the Change Password section.
3. Enter the old password, then a new password twice (both case-sensitive). Click SAVE.
4. Use the new password for future logins.
5. 5. 2. Password Recovery
This feature allows you to recover the login password you set for you router in case you forget
it.
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set for the
router.
2. Go to System > Administration, and focus on the Password Recovery section.
3. Tick the Enable box of Password Recovery.
4. Specify a mailbox (From) for sending the recovery letter and enter its SMTP Server
address. Specify a mailbox (To) for receiving the recovery letter. If the mailbox (From) to
send the recovery letter requires encryption, Tick the Enable box of Authentication and
enter its username and password.
Tips:
• SMTP server is available for users in most webmail systems. For example, the SMTP server address of Gmail is smtp.gmail.
com.
• Generally, Authentication should be enabled if logging in to the mailbox requires a username and password.