55
Chapter 4 Congure the Router in Wireless Router Mode
3. Tick the Enable box of Password Recovery.
4. Specify a mailbox (From) for sending the recovery letter and enter its SMTP Server
address. Specify a mailbox (To) for receiving the recovery letter. If the mailbox (From) to
send the recovery letter requires encryption, tick the Enable box of Authentication and
enter its username and password.
Tips:
• SMTP server is available for users in most webmail systems. For example, the SMTP server address of Gmail is smtp.gmail.
com.
• Generally, Authentication should be enabled if logging in to the mailbox requires a username and password.
5. Click SAVE.
To recover the login password, please visit http://mwlogin.net, click Forgot Password? on
the login page and follow the instructions to set a new password.
4. 11. 5. Local Management
1. Visit http://mwlogin.net, and log in with your Mercusys ID or the password you set for the
router.
2. Go to Advanced > System > Administration, and focus on the Local Management
section.
• Access the router via HTTPS and HTTP:
Tick the Enable box of Local Management via HTTPS to access the router via HTTPS and
HTTP, or keep it disabled to access the router only via HTTP.