01
Conventions
Conventions
The router, or MR60X mentioned in this User Guide stands for AX1500 Wi-Fi 6 Router
without any explanations.
Parameters provided in the pictures are just references for setting up the product,
which may dier from the actual situation.
You can set the parameters according to your demand.
More Info
Specications and the latest software can be found at the product page at the ocial
website http://www.mercusys.com.
The Quick Installation Guide can be found where you nd this guide or inside the
package of the router.
*Maximum wireless signal rates are the physical rates derived from IEEE Standard
802.11 specications. Actual wireless data throughput, wireless coverage, and
number of connected devices are not guaranteed and will vary as a result of network
conditions, client limitations, and environmental factors, including building materials,
obstacles, volume and density of trac, and client location.
*Use of 802.11ax (Wi-Fi 6), and features including OFDMA, MU-MIMO, 1024-QAM, BSS
Color, and Target Wake Time (TWT) requires clients to also support the corresponding
features. Actual power reduction by Target Wake Time may vary as a result of network
conditions, client limitations, and environmental factors.
*The 802.11ax white paper denes standardized modications to both the IEEE
802.11 physical layers (PHY) and the IEEE 802.11 Medium Access Control (MAC) layer
as enabling at least one mode of operation capable of supporting improvement of
at least four times the average throughput per station (measured at the MAC data
service access point) in a dense deployment scenario.
*Use of WPA3 requires clients to also support WPA3.