20
|
PROVENO E
Rev. 1.2 (24.08.2016)
Functional description
3.4.1. Display messages for the user
• Blinking number/letter in various fi elds of the display in general: the appliance is waiting for a value
to be set with the central dial (approx. 3 seconds).
• Blinking ‘PoS’ on the temperature display: the kettle is not in the cooking position (completely upright
and horizontal). E.g. heating and mixing functions, water automation and cooling function cannot be
operated.
• Blinking ‘Lid’ on the mixer display: the lid is open, mixing is not possible (safety regulations) or the lid
is closed when you try to tilt the kettle.
• ‘Err’ in the water automation function: the appliance does not get water.
• Blinking ‘SEt’ in the cooling function reminds you to start the mixer to make cooling more effi cient.
• Blinking ”InF1” on the temperature display when pressing the HACCP-button: The kettle has no ID
assigned for HACCP functionality - set user parameter Pr51.
3.4.2. Error message lights
There are two red indicator lights on the control panel to indicate an error or malfunction.
1
2
1. Indicator light 1
2. Indicator light 2
Error/malfunction Indicator light 1 Indicator light 2
Low water level in steam generator illuminates illuminates
Defective solenoid switch of the safety grid or the safety
grid is on the kettle and the lid’s lifting arm is in an upper
position. Remove the safety grid and press the STOP but-
ton.
blinking blinking
Automatic water fi lling pulses missing illuminates
Timing not succeeded (long power failure) illuminates
Mixing motor overheated illuminates blinking
Malfunction of external cooling equipment blinking illuminates
Defect in temperature adjustment (+124°C exceeded) blinking (by turns) blinking (by turns)
To Next Page
Loading...
